1.5 mm²
- Solid
- 1 × 1.38 mm
- Stranded rigid
- 7 × 0.52 mm
Back to Building WiresBuilding Wires / BV
450/750V PVC Insulated Single-Core Building Wire
Single-core copper building wire with PVC insulation for fixed electrical installations. BV uses a rigid copper conductor, with solid or stranded rigid conductor options depending on conductor size and the confirmed product specification. 60227 IEC 01 is referenced where applicable.
450/750VCopper ConductorPVC InsulationSingle CoreRigid Conductor60227 IEC 01 where applicable
Product construction
Rigid Conductor Construction for Fixed Wiring
BV is often described casually as a “solid wire”, but the rigid-conductor product family can use either solid or stranded rigid conductor construction depending on conductor size and the applicable specification.
| Nominal section | Representative rigid construction |
|---|---|
| 1.5 mm² | 1 × 1.38 mm solid / 7 × 0.52 mm stranded rigid |
| 2.5 mm² | 1 × 1.78 mm solid / 7 × 0.68 mm stranded rigid |
2.5 mm²
- Solid
- 1 × 1.78 mm
- Stranded rigid
- 7 × 0.68 mm
Representative construction examples are shown for product identification. Final conductor construction and dimensions are confirmed against the applicable product specification before quotation.
Product specification
Specifications at a Glance
Product referenceBV / 60227 IEC 01 where applicable
Rated voltage450/750V
CoreSingle core
ConductorCopper
Conductor typeRigid — solid or stranded depending on confirmed construction
InsulationPVC
Outer sheathNone
Current Huanyu commercial size range1.5–300 mm²
Typical packingTypical coil length is 100 m. Other export coil lengths, marking and packing can be reviewed according to confirmed order requirements.
Detailed dimensions, resistance values and test data are confirmed against the applicable current product specification before quotation.
Standard review
Standard & Specification Review
For applicable 60227 IEC 01 (BV) construction, Huanyu references GB/T 5023.3-2008. If the destination market or project specifies another national or international building-wire standard, send the exact designation for technical review before supply is confirmed.
Buyer checklist
What Buyers Should Verify
Conductor construction
Confirm whether the rigid conductor is solid or stranded for the required size.
DC resistance
Review electrical resistance against the confirmed specification.
Insulation control
Confirm insulation dimensions and integrity requirements.
Coil length & marking
Confirm supplied length, cable marking and order labels.
Quality control
Building Wire Quality Control at Huanyu
- Incoming conductor and insulation material checks
- Construction and dimensional checks during production
- Spark testing
- Electrical and physical routine tests aligned with the confirmed standard
- Release documentation and packing review
Applications
Typical Applications
Residential fixed wiring
Interior fixed wiring subject to the applicable local electrical code.
Commercial interior wiring
General fixed wiring routes in commercial buildings.
Conduit & protected wiring
Single-core wire installed in a suitable protected wiring system.
Lighting & final circuits
Fixed circuits where permitted by local code and project design.
Final conductor size and installation method must follow the applicable local electrical code and project design.
Supply options
Colours & Packing
Common electrical colours are confirmed against the order. Typical coil length is 100 m. Other export coil lengths, marking and packing can be reviewed according to confirmed order requirements.
Documentation
Compliance & Documentation
Huanyu maintains current domestic manufacturing authorization and model-specific CCC documentation for selected building-wire products. Exact model scope is confirmed against the applicable certificate and order specification.
Review Quality & Credentials →Quotation review
Request a Quote for 450/750V Single-Core Building Wire
Size · Conductor Construction · Standard · Colour · Coil Length · Quantity · Destination